PowerCat 6A Angled Side Entry Euromod II RJ45 568A/B Shielded Module – Black


Part No: MEU-00070-04

Region: emea

The shielded Euromod modular system provides a flexible and versatile method of installation, allowing the user the choice of installing as many data outlets as required. The module is compatible with the Euromod range of wall plates and its angled design reduces patch cord bend radius.

The PowerCat 6A side entry Euromod module is designed specifically for shallow backbox and trunking applications. The module features the unique side entry DataGate™ shielded connector. This shielded connector offers superior alien crosstalk suppression, excellent insertion loss, and provides enhanced electromagnetic interference (EMI) protection by utilising robust die-cast zinc alloy connector body housing. This shielded connector also features a unique spring loaded shutter that not only protects it from dust and contaminates, but the ingenious spring loaded design also ejects improperly seated patch cords. The shielded connector is dual colour coded for either 568A or 568B wiring schedules. The DataGate PowerCat 6A shielded connector is also backwards compatible with shielded C6 and C5e systems

Molex recommends the full range of PowerCat 6A shielded products be used in a system to maximise cabling performance. This system is compliant with ISO/IEC 11801 A1.1 and TIA 568-C.2 Cat 6A for the support of 10GBASE-T.

Features & Benefits Technical Info
  • Single side entry module
  • 25 x 50 fascia
  • 360° die-cast shielded shuttered RJ45 DataGate connector
  • Protected labelling facility
  • Independently tested
  • Category 6A performance when installed as a complete PowerCat 6A shielded system
  • RoHS Compliant

Mechanical Characteristics
Housing: Zinc Alloy plated Bright Ni/Cu
Operating Life: Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 1.25 micrometres Au/Ni
Contact Force: 100g minimum
Plug Retention Force: 6.8kg minimum

IDC Connector
Housing: Polycarbonate, UL94V-0 rated
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin Matte Finish
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid

Minimum Backbox Depth Requirement: 28mm.
Termination Tool: 110

Single gang (2 modules) only are recommended for side entry installation. Double gang (4 modules) can only be installed using 180º termination.

Electrical Characteristics
Interface Resistance: 20mΩ
Initial Contact Resistance: 2.5mΩ
Insulation Resistance: >100 MΩ

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.