Molex Plug and Play Advanced Fiber Optic Systems offer premium factory-controlled optical performance, enable flexible system configuration and fast, economical installation. ModLink is ideal for mission critical applications such as Data Centers and Storage Area Networks, applications where fast installation is paramount and environments where moves adds and changes are frequent or managed in-house.
Features & BenefitsTechnical InfoRelated Products
Round, flexible outer jacket is easy to bend, route and install
Available in Plenum (OFNP) and LS0H constructions
Industry-leading low insertion loss (0.35dB Maximum Insertion Loss for Laser Optimised OM3/4 Cables and OS1/2 Cables, 0.10dB Typical)
Cables available in 12 and 24 fiber constructions
ModLink Advanced Fiber Optic Cables are 100% tested
Pulling eyes installed to protect the assembly during installation
Mechanical Characteristics Durability: 1,000 Cycles Guide Pin Retention: 3 lbs Nominal Outside Diameter: 4.5 mm (0.177 in) Cable Weight: 19 kg/km (12.8 lb/kft) Minimum Bend Radius Install: 2.5 in (6.35cm) Long Term: 1.25 in (3.18cm) Maximum Long Term Tensile Load: 90 lbf (440 N) Operating Temp: -0° to 70°C (32°F to 158°F) Storage Temp: -40° to 70°C (-40°F to 158°F) Installation Temp: -0° to 70°C (32°F to 158°F) Jacket Colors: Multimode 62.5μm OM1 & 50μ OM2: Orange Laser Optimized 50μm OM3 (10G): Aqua Multimode OM4: Erika Violet Singlemode: Yellow
Electrical/Optical Characteristics Polarity: C Maximum Insertion Loss: OM1, OM2, OM3 Standard Construction: 0.6dB OM3, OM4 Low Loss Construction: 0.35dB OS1/2 Standard Construction: 0.75dB OS1/2 Low Loss Construction: 0.35 dB Return Loss: OS1/2 Standard Construction: >60dB OS1/2 Low Loss Construction: >60dB Attenuation: Multimode OM1, OM2, OM3, OM4: 3.5dB@850nm/ 1.5dB@1300nm Single Mode OS1/2: 0.38 @1300nm or 1550nm
Commerical Standards International: ISO/IEC 11801 North American: ANSI/TIA/EIA-568-C.3
Reference Information Applications Modlink systems are designed to support a variety of high-speed network topologies including: IEEE 802.3 40GBaseSR4/100GBaseSR10 IEEE 802.3 10GBase-SR/SW 10Gbps IEEE 802.3 10Gbase-LX4 10Gbps Fibre Channel 400-M5-SN-1 4Gbps Fibre Channel 1200-M5E-SN1 10Gbps Fibre Channel FC-PH 1Gbps IEEE 802.3 1000Base-SX/LX 1Gbps FDDI 100Mbps IEEE 802.3 FOIRL 10Mbps IEEE 802.3 10Base-F 10Mbps ATM 155 Mbps, 622 Mbps, 1.2 Gbps. 2.4 Gbps
Part Numbering Replace YYY in part number for cable length
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.