x
Part No: CAA-00251
Region: emea apac
Molex PowerCat 6 FTP 4 Pair cable has been designed to support high speed data transmission systems. The cable is part of the PowerCat 6 FTP range of products that are designed to support a growing requirement for shielded cabling systems.
We recommend that the full range of PowerCat 6 FTP products are used in a system to maximize cabling performance, providing extended frequency response and enhanced bandwidth.
MECHANICAL
Conductor Size : 23 AWG
Primary Insulation : Solid Polyethylene
Nominal O.D.: 1.16mm
Screen Material: Laminated Foil Tape
Sheath Type: LS0H 60332.1
Minimal Wall: 0.55mm
Nominal O.D: 7.4mm +/-0.4mm
Cable weight: 13.6 Kgs Nominal
NVP: 76%
Maximum Pulling Force: 100N
PHYSICAL
Shipping Weight: 500m reel: 26kg
ELECTRICAL
D.C. Resistance : 9.38 ohm/100m max
DC Conductor Resistance Unbalance: 5% ma
COMMERCIAL STANDARDS
ISO 11801
TIA/EIA 568 C-2
PoE
Our PowerCat 6 system is suitable for PoE applications as defined below:
IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
Notes:
For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout. To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
Molex recommends that the full range of PowerCat 6 products be used in a system to maximize cabling and PoE performance. Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/ourwarranty/
