Mechanical Characteristcs
Materials
0.54 mm (24 AWG), bare copper wire insulated with foam polyethylene (nonplenum) or foam FEP (plenum). Two insulated conductors twisted together to form a pair and four such pairs laid up to form the center. The cable is shielded with an overall polyester aluminum foil with solid tinned copper drain wire and is jacketed with flame retardant PVC.
Pulling Tension: 110N (25 lbf)
Temperature Rating
Installation: 0˚C to +50˚C
Operation: -10˚C to +60˚C
Colour Code
Pair 1: White/Blue
Pair 2: White/Orange
Pair 3: White/Green
Pair 4: White/Brown
Commercial Standards
North American: TIA/EIA-568-B.2
ASTM D4565 and ASTM D4566
International: ISO/IEC 11801 Category 5e, Class D
Flame Rating
Non-plenum: UL 1666, CMR, CMG, IEC 332-1, UL 1581, CM
Plenum: NFPA 262
Applications
PowerCat 5e F/UTP Cable is intended for high speed data applications including:
ATM 155 Mb/s
FDDI/CDDI 100 Mb/s
Ethernet 1000BASE-T, 100BASE-TX,
10BASE-T and Token Ring
NOTE: Standard Lengths: 1,000 feet (305 meters).
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.