Part No: 180993-0001
Region: americas emea
The CoreSync Gateway 60W is a low voltage power distribution and network connected module compliant with the IEEE 802.3at standard and Cisco’s UPOE standard that utilizes 60W-per-port PoE technology.
This Gateway 60W receives a minimum guaranteed 51 watts of usable power from a PoE Network Switch, ensuring control and secure two-way communication with lights, sensors, and other CoreSync Daisy-Chained devices in a CoreSync-enabled building infrastructure.
MECHANICAL
Housing Material: Extruded Aluminum (Metal Enclosure)
Length: 117.7 mm (4.63 in)
Width: 53.33 mm (2.10 in)
Height: 25.51 mm (1.00 in)
Weight: 119 g (4.19 oz)
Housing Material: LEXAN 243R-111 (Plastic Enclosure)
Length: 97.4 mm (3.83 in)
Width: 53.33 mm (2.10 in)
Height: 24.2 mm (0.95 in)
Weight: 79 g (2.79oz)
ELECTRICAL
Maximum Power Input: 60W at 42-57VDC
Maximum Power Output: 57.5W at 42-57VDC
Nominal Power Input: 51W at 42-57VDC (as per UPOE Standard)
Standby Power Consumption: 1.5W at No Load
Power Consumption at 51W: 2.0W (6.82 BTU/hr)
Power Consumption at 60W: 2.5W (8.53 BTU/hr)
ENVIRONMENTAL
Ambient Temp Range: 0 to 40°C (32 to 104°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Max. case temperature: 90°C for Metal Enclosure; 75°C for Plastic Enclosure
Relative Humidity: 10-80% Non-Condensing
Environmental Rating: Indoor
PRODUCT SAFETY
Internal Over-Temperature Protection
DO NOT hot swap
COMMERCIAL STANDARDS
PoE, PoE+, UPOE
Class 2 Electrical Device
UL 2108 Listed
CSA22.2 No. 250
FCC Part 15 Subpart B
Plenum Rated (Metal Enclosure)
CONNECTION INTERFACES
PoE Input: RJ45, CAT 5e (PoE rated) cable or better (visit https://www.molexces.com)
CoreSync Output: 10-Pin Micro-Fit 3.0 Connector, CoreSync Harness (visit https://molexces.com)
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.