PowerCat 6 MOD-Clip DataGate Jack

• Patented Spring-Loaded Shutter: prevents incomplete mating and protects from dust and contaminants
• Patented IDC V-shaped contacts that flex not fatigue when terminated
• Features pointed IDC towers to speed termination and enhance cable retention
• Dual color-coding allows for 568A/B wiring configuration
• Can be terminated using industry standard punchdown tools
• RJ-11 & RJ-12 compatible
• Allows rear and side entry cable termination
• Engineered for use with Clipsal®, HPM® and PDL® wallplate systems

Mechanical Characteristics
Jack Connector
Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 50µ” Gold/100µ”
Nickel Contact Force: 100g minimum
Plug Retention Force: 15 lb.

IDC Connector
Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 200 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin/Lead Plate
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid

Commercial Standards
TIA/EIA-568-C.2:2009 cat.6
EN 50173-1:2011 Class E
ISO/IEC 11801:2010 (Ed 2.2) Class E
FCC Subpart F68.5

Pending Approvals
UL-1863
CSA

Electrical Characteristics
Interface Resistance: 20 milliohms
Initial Contact Resistance: 2.5 milliohms
Insulation Resistance: >100 Megaohms

PoE
Our PowerCat 6 system is suitable for PoE applications as defined below:
IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
Notes:
For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout. To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
Molex recommends that the full range of PowerCat 6 products be used in a system to maximize cabling and PoE performance. Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/ourwarranty/