Part No: 25.B027G
The Rack Mount Power Strip/ Surge Suppressor features 12 outlets to provide power to rack mounted equipment plus a 15 AMP circuit breaker. A 12 foot, 14 AWG cord and 2 isolated filter banks prevent equipment interaction. The unit provides superior spike filtering and line noise attenuation.
No. of Receptacles: 12
No. of Isolated Filter Banks: 2
AC Energy Absorption (Joules): 320
AC Cord Length: 3.66m. (12 ft)
Operating Temperature: -10°C to +40°C
AC Input: 120 VAC, 15 amps; standard 3 prong NEMA 5-15P
Load Handling: 1800 watts maximum, total 15 amps per socket
High Frequency: Noise Suppression (Specs are given for Bank #1.Protection increases by 25dB per bank @ 1 MHz, nominally)
Transient Suppression: Handles up to 13,000 amp spikes. Protection in all 3 modes: hot to neutral, hot to ground, and neutral to ground. Meets or exceeds IEEE 587 category A & B Specification
Initial Clamping Voltage: 150 Volts AC RMS
Response Time: Instantaneous (0 nanoseconds) transient amplitude reduction occurs faster than the clamping response of the varistors due to high rejection rate of the filter network
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.