Probes and sensors

Results: 1 to 10 of 10

  • Pressure Sensor

    Part no: 181030170

    Pressure Sensor

    Pressure sensor is an element of the environment control system of the CIIM family. It is designed for use in rooms and places where air...

    Add to project list
  • Flood Sensor additional external probe

    Part no: 181030169

    Flood Sensor additional external probe

    The Flood Sensor Additional External Probe is used to detect the occurrence of any voltage conductive liquids on the protected surface. It is intended for...

    Add to project list
  • Conductive Fluid Sensing Cable 1m

    Part no: 181030154

    Conductive Fluid Sensing Cable 1m

    The purpose of the Conductive Fluid Sensing Cable is to control the presence of any fluid on the secured surface. It is used in rooms...

    Add to project list
  • Power Supply Detector 3-phase

    Part no: 181030151

    Power Supply Detector 3-phase

    The power supply detector is used to protect devices powered by a three-phase power supply (e.g. motors) from damage, in the event of phase loss...

    Add to project list
  • Power Supply Detector 1-phase

    Part no: 181030150

    Power Supply Detector 1-phase

    The power supply detector is used to control the voltage value in a single-phase network to protect the receiver against voltage increase or decrease beyond...

    Add to project list
  • PIR Motion Detector

    Part no: 181030156

    PIR Motion Detector

    PIR Motion Detector allows detection of motion in the protected area. Basic features of device are listed below: • Dual element pyrosensor. • Digital motion...

    Add to project list
  • Combo Sensor High Accuracy

    Part no: 181030149

    Combo Sensor High Accuracy

    The temperature and humidity sensor is an essential component of the CIIM system. It is designed for use in rooms and places where the ambient...

    Add to project list
  • Water Sensor

    Part no: 181030147

    Water Sensor

    The water sensor is a secondary component of the CIIM system, used to detect the occurrence of any voltage conductive liquids on the protected surface...

    Add to project list
  • Fire Sensor

    Part no: 181030146

    Fire Sensor

    The fire detector is a minor component of the CIIM system. It is used to detect fire at an early stage. For this purpose, it...

    Key Features: Smoke compartment construction accelerating the detection of smoke; Smoke detection in accordance with the requirements...
    Add to project list
  • Temperature Sensor

    Part no: 181030142

    Temperature Sensor

    The temperature sensor is an essential component of the CIIM system. It is designed for use in rooms and places where the ambient temperature is...

    Add to project list

Connect with Molex

Customize your experience