x
earth

CUSTOMIZE YOUR EXPERIENCE

Close
Change Language: English

CoreSync PoE Gateway 2.0

'

Part No: 180798-1000

Region: americas northern-europe

The CoreSync PoE Gateway 2.0 is a low voltage power distribution and network connected module compliant with the IEEE 802.3bt standard that utilizes enhanced 90W-per-port PoE technology.

This PoE Gateway receives a minimum guaranteed 71.3 watts of usable power from a PoE Network Switch, ensuring control and secure two-way communication with lights, sensors, and other CoreSync Daisy-Chained devices in a CoreSync-enabled building infrastructure.

Features & Benefits Technical Info Installation Instructions Related Products
  • IEEE 802.3bt compliant device - Uses low voltage PoE infrastructure for power and communication with lights, sensors, and other devices
  • Input power up to 90W - Capable of powering a single or multiple CoreSync devices
  • CoAP network communication - Easy and secure convergence of IP infrastructure
  • CoreSync Enabled - Daisy-Chain capable with easy connection to all CoreSync devices
  • UL 2108 listed - Safe operation and industry standard compliance

MECHANICAL
Housing Material: Extruded Aluminum
Length: 117.7 mm (4.63 in)
Width: 53.33 mm (2.10 in)
Height: 25.51 mm (1.00 in)
Weight: 104 g (3.66 oz

ELECTRICAL
Maximum Power Input: 94.1W at 42-57VDC
Maximum Power Output: 90W at 42-57VDC
Nominal Power Input: 71.3W at 42-57VDC (as per 802.3bt Type 4 Standard)
Standby Power Consumption: 2.0W at No Load
Power Consumption at 71.3W: 3.1W (10.6 BTU/hr)
Power Consumption at 94.1W: 4.1W (14 BTU/hr)

ENVIRONMENTAL
Ambient Temp Range: 0 to 40°C (32 to 104°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Max. case temperature: 90°C for Metal Enclosure
Relative Humidity: 10-80% Non-Condensing
Environmental Rating: Indoor

COMMERCIAL STANDARDS
PoE, PoE+, IEEE 802.3bt
Class 2 Electrical Device
UL 2108 Listed
CSA22.2 No. 250
FCC Part 15 Subpart B
Plenum Rated

PRODUCT SAFETY
Internal Over-Temperature Protection
DO NOT hot swap

CONNECTION INTERFACES
PoE Input: RJ45, CAT 5e (PoE rated) cable or better (visit https://www.molexces.com)
CoreSync Output: 10-Pin Micro-Fit 3.0 Connector, CoreSync Harness (visit https://molexces.com)

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close