x
earth

CUSTOMIZE YOUR EXPERIENCE

Close
Change Language: English

External Mini Loose Tube, Optical Fiber Cable

'

Part No: AFOMS

Region: apac

The External Mini Loose Tube Optical Fiber Cable is a loose tube dielectric optical cable designed for external underground installations in (micro) ducts by pulling, blowing or floating techniques. Polyamide provides anti-termite protection. Optimized for blowing in mini ducts of 10mm diameter (internal).

***PLEASE NOTE THIS PRODUCT IS ONLY AVAILABLE IN AUSTRALIA AND NEW ZEALAND***

Multi-loose tube construction – 2 to 144 fibers
The tube is made of a thermoplastic material, containing up to 12 optical fibers filled with a low viscosity, thixotropic, non-melting gel fully compatible with fiber coating and tube material. A glass GRP strength member and water swellable elements (drycore) provide longitudinal water tightness. The inner sheath is made up of a UV stabilized polyethylene in compliance with AS 1049. The hard jacket is a UV stabilized polyamide (Nylon) in compliance with AS 1049 integrally bonded to PE inner sheath. The outer sheath is a UV stabilized polyethylene in compliance with AS 1049. Two ripcords provided beneath the sheath for easy removal.

Features & Benefits Related Products

MECHANICAL
Number of fibers: 2 to 72
Number of elements: 6
Tube/Filler diameter: 1.55mm
Cable nominal diameter: 6.3mm
Cable nominal weight: 33kg/km
Max. installation tension: 1.0kN
Max. crush resistance: 2.0kN/100mm
Min. bending radius
   At full load: 130mm
   At no load: 65mm

Number of fibers: 96
Number of elements: 8
Tube/Filler diameter: 1.55mm
Cable nominal diameter: 7.4mm
Cable nominal weight: 49kg/km
Max. installation tension: 2.0kN
Max. crush resistance: 2.0kN/100mm
Min. bending radius
   At full load: 220mm
   At no load: 110mm

Number of fibers: 144
Number of elements: 12
Tube/Filler diameter: 1.35mm
Cable nominal diameter: 8.4mm
Cable nominal weight: 62kg/km
Max. installation tension: 2.0kN
Max. crush resistance: 2.0kN/100mm
Min. bending radius
   At full load: 220mm
   At no load: 110mm

Temperature range:
   Installation: -0°C to +50°C
   Transport & Storage: -20°C to +70°C
   Operation: -10°C to +70 °C

PHYSICAL
Fiber and Buffer Tube Colors:
1 - Blue, 2 - Orange, 3 - Green, 4 - Brown,
5 - Gray, 6 - White, 7 - Red, 8 - Black,
9 - Yellow, 10 - Violet, 11 - Pink, 12 - Aqua

COMMERCIAL STANDARDS
IEC 60794-5
ACMA - AS/CA S008
AS/NZS 2857
AS 1049

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close