The PowerCat 6 45 x 45mm Module is the walloutlet component of the PowerCat 6 System.
Designed to comply with the Category 6 specification, the PowerCat 6 System performance is enhanced by the patented plug and socket combination of the RJLP socket and Molex plug, allowing Category 6 level performance and backwards compatibility with the Molex Premise Networks PowerCat System.
Molex Premise Networks recommends that the full range of PowerCat 6 products is used in a system to provide the performance indicated in the Category 6 standard.
Mechanical Characteristics
Jack Connector
Operating Life: Minimum 500 insertion cycles
Contact Material: Phosphor Bronze
Contact Plating: 1.25 Micrometres Au/Ni
Material: UL94V0 Thermoplastic
IDC Connector
Operating Life: Minimum 100 Reterminations
Contact Material: Phosphor Bronze
Contact Plating: Sn/Pb over Ni
Wire Accommodation: 2 x 22-26 AWG solid or stranded
Electrical
D.C Resistance: <20mΩ
D.C Resistance Imbalance: <2.0mΩ
Insulation Resistance: >100mΩ
Backbox trunking requirement
Minimum clearance 16mm
Shipping weight
Box 20 = 390gm
Existing customers can access our Customer Support Portal or see here for Product Documentation and Installation Instructions.
We operate through a global network of independent distributors to ensure you can access the right products at the right time.
Our local sales and technical support teams are on hand to provide the product and technical expertise you need.
