The PowerCat 6 22.5 x 45mm module is compatible with the Legrand® range of 45 x 45mm bezels. Two modules or a single module and a blank may be installed in this format. The product is a fully assembled unit featuring the shuttered DataGate™ connector. The angled design reduces patch cord bend radius and features a protected labeling feature. Individual ports may be color coded using a connector icon, for site-specific network administration.
The 22.5 x 45mm module features the DataGate™ Category 6 connector. This superior RJ45 IDC includes a unique integral shutter that not only protects the connector from dust and contaminants, but the ingenious spring-loaded design also ejects improperly seated patch cords. The DataGate™ connector is dual color coded for either 568A or 568B wiring schedules and is RJ11 compatible.
Jack Connector
Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 50µ” Gold/100µ” Nickel
Contact Force: 100g minimum
Plug Retention Force: 15 lb.
IDC Connector
Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy IDC
Contact Plating: Tin matte finish
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid
Electrical Characteristics
Interface Resistance: 20 milliohms
Initial Contact Resistance: 2.5 milliohms
Insulation Resistance: >100 Megaohms
Commercial Standards
TIA/EIA-568-C.2:2009 cat.6,
EN 50173-1:2011 Class E,
ISO/IEC 11801:2010 (Ed 2.2) Class E,
FCC Subpart F68.5
PoE
Our PowerCat 6 system is suitable for PoE applications as defined below:
IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
Notes:
For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout. To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
Molex recommends that the full range of PowerCat 6 products be used in a system to maximize cabling and PoE performance. Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/ourwarranty/
Existing customers can access our Customer Support Portal or see here for Product Documentation and Installation Instructions.
We operate through a global network of independent distributors to ensure you can access the right products at the right time.
Our local sales and technical support teams are on hand to provide the product and technical expertise you need.
