x
earth

CUSTOMIZE YOUR EXPERIENCE

Close
Change Language: English Region: Americas

PowerCat 6 Shielded Angled Legrand Compatible Module 22.5 x 45mm – White

'

Part No: MLG-00022-02 , MLG-00025-02

Region: emea

Request a Quote
Download Datasheet

The PowerCat 6 Shielded 22.5 x 45mm and 45 x 45mm modules are compatible with the Legrand range of 45 x 45mm bezels. Two modules or a single module and a blank may be installed in this format. The product is a fully assembled unit featuring the shielded shuttered DataGate connector. The angled design reduces patch cord bend radius and features a protected labelling facility. Individual ports may be color coded using a connector icon for site-specific network administration.

Features & Benefits Technical Info
  • Legrand bezel compatible
  • 360° shielded shuttered RJ45 DataGate connector
  • Protected labelling facility
  • Angled fascia

Mechanical Characteristics
Jack Connector
Can: 0.25mm brass to C2680R pre-plated tin over nickel
Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 1.27 micrometres Au/Ni
Contact Force: 100g minimum
Plug Retention Force: 6.8kg

IDC Connector
Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin/Lead Plate
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid

Minimum Backbox Depth Requirement: 35mm 90° cable entry may not possible in certain styles of floor boxes or back boxes
Termination Tool: 110

Electrical Characteristics
Interface Resistance: 20mΩ
Initial Contact Resistance: 2.5mΩ
Insulation Resistance: >100 MΩ

PoE
Our PowerCat 6 system is suitable for PoE applications as defined below:
IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
Notes:
For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout. To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
Molex recommends that the full range of PowerCat 6 products be used in a system to maximize cabling and PoE performance. Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/ourwarranty/