Change Language: English

PowerCat 6A 45 x 45mm Side Entry Module RJ45 568A/B Shielded – Black


Part No: MLG-00034-04

Region: emea

These PowerCat 6A shielded modules are compatible with the Legrand® range of 45 x 45mm bezels. The angled design reduces patch cord bend radius and features a protected labelling feature. Individual ports may be colour coded using a connector icon, for site-specific network administration.

The PowerCat 6A side entry Legrand compatible module is designed specifically for shallow backbox and trunking applications. The module features the unique side entry DataGate™ shielded connector. This shielded connector offers superior alien crosstalk suppression, excellent insertion loss, and provides enhanced electromagnetic interference (EMI) protection by utilising robust die-cast zinc alloy connector body housing. This shielded connector also features a unique spring loaded shutter that not only protects it from dust and contaminates, but the ingenious spring loaded design also ejects improperly seated patch cords. The shielded connector is dual colour coded for either 568A or 568B wiring schedules. The DataGate PowerCat 6A shielded connector is also backwards compatible with shielded C6 and C5e systems

Molex recommends the full range of PowerCat 6A shielded products be used in a system to maximise cabling performance. This system is compliant with ISO/IEC 11801 A1.1 and TIA 568-C.2 Cat 6A for the support of 10GBASE-T.

Features & Benefits Technical Info Related Products
  • Single side entry module
  • Legrand® 45 x 45mm bezel compatible
  • 360° die-cast shielded shuttered RJ45 DataGate connector
  • Protected labelling facility
  • Angled fascia
  • Category 6A performance when installed as a complete PowerCat 6A shielded system
  • RoHS Compliant

Mechanical Characteristics
Housing: Zinc Alloy plated Bright Ni/Cu
Operating Life: Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 1.25 micrometres Au/Ni
Contact Force: 100g minimum
Plug Retention Force: 6.8kg minimum

IDC Connector
Housing: Polycarbonate, UL94V-0 rated
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin Matte Finish
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid

Minimum Backbox Depth Requirement: 32mm.
Termination Tool: 110

Single gang (2 modules) only are recommended for side entry installation. Double gang (4 modules) can only be installed using 180º termination.

Electrical Characteristics
Interface Resistance: 20mΩ
Initial Contact Resistance: 2.5mΩ
Insulation Resistance: >100 MΩ

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.