The PowerCat 6 shielded angled MOD-SNAP III Module is ideal for floor box applications. The product is a fully assembled unit featuring the shuttered shielded DataGate connector in a 38.5x25mm fascia (BT6C size). The angled design reduces patch cord bend radius particularly in shallow floor-box applications. The angled MOD-SNAP III module can also be used in the MOD-SNAP range of wallplates.
Electrical Characteristics
Interface Resistance: 20mΩ
Initial Contact Resistance: 2.5mΩ
Insulation Resistance: >100 MΩ
Mechanical Characteristics
Jack Connector
Can: 0.25mm brass to C2680R pre-plated tin over nickel
Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 1.27 micrometres Au/Ni
Contact Force: 100g minimum
Plug Retention Force: 6.8kg
IDC Connector
Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin/Lead Plate
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid
Minimum Backbox Depth Requirement: 35mm 90° cable entry may not possible in certain styles of floor boxes or back boxes
Termination Tool: 110
Existing customers can access our Customer Support Portal or see here for Product Documentation and Installation Instructions.
We operate through a global network of independent distributors to ensure you can access the right products at the right time.
Our local sales and technical support teams are on hand to provide the product and technical expertise you need.
