Part No: RAA-F-R2W, RAA-F-R2W-T, RAA-F-R4W, RAA-F-R4W-T, RAA-F-1W, RAA-F-T, RAA-L-KIT, RAA-L-S
***PLEASE NOTE THESE PRODUCTS ARE ONLY AVAILABLE IN POLAND AND RUSSIA***
Ensuring that good air flow and clear visibility in the network cabinet is maintained is vital to ensure that optimum performance is achieved from the network installation.
Molex network cabinet fan units are designed to be fitted to the aperture in the top plate of the cabinet. The products are supplied with an illuminated power switch and either 2 or 4 fans. The fan units are available with or without an integrated thermostat. The fan units are supplied with power cable (without plug) and fixing kit.
Molex 19” Lighting Kits for floor and wall mounted cabinets are supplied with a 230V, 5W LED lamp and switch for clear visibility of the networking equipment installed. A door switch power supply is available separately.
Full list of part numbers: RAA-F-R2W, RAA-F-R2W-T, RAA-F-R4W, RAA-F-R4W-T, RAA-F-1W, RAA-F-T, RAA-L-KIT, RAA-L-S
Fan Unit Material: Plastic
Finish: Black 9005
Power supply: 230V 50Hz
Rated current 2 Fan unit: 0.28 A / 4 Fan unit: 0.56 A
Power rating 2 Fan Unit: 44 W / 4 Fan Unit: 88 W
2 Fan Unit: 330 / 4 Fan Unit: 660
Ambient temperature: from -10 to +70°C
Relative humidity: from 20 to 80%
Ingress Protection Rating: IP20 (when mounted in cabinet)
Electrical shock protection: neutralization
Voltage rating: 230V
Power rating: 22 W
Rated current: 0.14 A
Speed of rotation: 2850 1/min.
Noise level: ca. 45 dB
Pressure: 75 Pa
Durability: min. 50 000 hr
Type: NO- normally open
Sensor: Thermal bimetal
Temperature range: 0-60°C, hysteresis ca. 7°C
Contact: Snap action
Power carrying capacity: 6 A(1) 250 V AC
RFI: N (in accordance with VDE 0875)
Material: Sheet steel, powder coat
Finish: Black 9005
Lighting kit fitted with 230V, 5W LED lamp
Bracket for fitting to 19” cabinet mounting profiles
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.