x
Part No: 91.XX.XXX.XXXXX, 91.1X.XXX.XXXXX, 91.3X.XXX.XXXXX, 91.9X.XXX.XXXXX, 91.BX.XXX.XXXXX, 91.LX.XXX.XXXXX
Region: global
Molex Optical Fiber Patch Cords are LS0H jacketed as standard, with PVC and Plenum rated cables are available on request. Molex patch cords offer factory–controlled performance in a variety of connector, ISO performance standards and lengths.
Molex has taken specific attention to the end-face geometry and fiber core alignment to ensure reliability and optimized performance.
Patch cords are available in a variety of connector options, fiber types, cable types, jacket types, different lengths and color options.
COMMERCIAL STANDARDS
ISO/IEC 11801-1:2017
ANSI/TIA/ EIA 568.3-D
ANSI/TIA/EIA-492
TELECORDIA GR-409
ICEA-596
AS/CA S008:2020
WARRANTY
Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/our-warranty/
MECHANICAL
Cordage O.D.: 2.0mm+/-0.1mm x 4.1mm +/- 0.2mm
Buffer Diameter: 900μm
Primary Coating: 245μm
Strength Member: Aramid Yarn
Jacket Material: LS0H IEC 61034-1 & 2, IEC-60332-1, IEC-60754-1 & 2
Minimum Bend Radius Install: 3.0cm.
Long Term Bend Radius: 2.0cm
Operating Temperature: -40°C to +85°C
PHYSICAL
Color Matrix:
OS2 9/125: Yellow
OM1 62.5/125: Orange
OM2 50/125: Gray
OM3 50/125: Aqua
OM4 50/125: EV/Aqua
OM5 50/125: Lime Green
ELECTRICAL
Please refer to the datasheet
PART NUMBER MATRIX
Please refer to the datasheet
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.
Optical Fiber Pigtails
90 Degree Boot Optical Fiber Patch Cord
Uniboot LC Low Loss Optical Fiber Patch Cords