Part No: PCD-07136, PCD-07131, PCD-07132, PCD-07133, PCD-07134, PCD-07135
Region: apac emea
Molex Category 6A patch cords are designed to support high-speed 10GBASE-T networks and are backward compatible with 10/100/1000BASE-T networks. Manufactured from high quality four pair 26AWG stranded copper wire, each pair is shielded in aluminium/mylar foil and enclosed in a LS0H sheath. The cable is terminated with Molex high performance Category 6A shielded RJ45 plugs. This high performance assembly is enclosed in a UV stabilized, flexible polyamide covering, protecting the patch cord against mechanical shock, water and dust ingress and capable of withstanding an operating temperature of -20°C to +60°C or -4°F to 140°F.
MECHANICAL
Cable
Conductor Size: 26AWG
Conductor material: Stranded Bare Copper
Construction: U/FTP
Screen material: Al/Mylar
Drain Wire: Tinned copper wire
Sheath: LSZH
Outer Diameter including flexible tube: 11.5mm
Rated Voltage: < 80V
Heat shrink cable covering material: Polyolefin
Flexible tube material: Nylon PA6
Flexible tube IP Rating: IP66
UV stabilized
Flame Retardancy: UL 94-V2
Color: Black
ELECTRICAL
Plug
Durability: 200 mating cycles
Housing material: Clear Polycarbonate UL 94-V0
Contact Material: Copper alloy, selective gold plating
Shield: Copper alloy nickel plated
RJ45 plug dimensions compliant with IEC 60603-7
Dielectric Withstand Voltage: 1000 Volts AC
COMMERCIAL STANDARDS
ANSI/TIA TIA-568.2-D:2018
ISO/IEC 11801:2017
IEEE 802.3af, 802.3at, 802.3bt
IEC 60603-7
Backward compatible with 10/100/1000BASE-T systems
ENVIRONMENTAL STANDARDS
RoHS compliant
Note: Outdoor WAP and security camera devices include ethernet/patch cord cable weather protection fittings/glands, which vary depending on the manufacturers’ designs. Molex does not guarantee that its outdoor C6A patch cord is compatible with all types of outdoor WAPs and security cameras ethernet/patch cord cable weather protection fittings. Check the dimensions of the device’s fitting/gland before installation.
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.