This loose tube dielectric optical cable is designed for external underground installations in ducts by pulling, jetting or floating techniques or by direct burial in open-cut trenches. Polyamide provides anti-termite protection.
Made up of a multi-loose tube construction – 2 to 144 fibers, the tube is made of a thermoplastic material, containing up to 12 optical fibers filled with a low viscosity, thixotropic, non-melting gel fully compatible with fiber coating and tube material, a glass GRP strength member, the required numbers of elements (tubes and fillers) are SZ stranded around the central strength member and there are water swellable elements (dry-core) providing longitudinal water tightness. The sheath is made up of a UV stabilized polyethylene with two ripcords provided beneath for easy removal. The hard jacket is made up of a UV stabilized polyamide (Nylon) and the sacrificial sheath is made up of a UV stabilized polyethylene. The sheath, hard jacket and sacrificial sheath are all in compliance with AS 1049.
Available in Australia only.
COMMERCIAL STANDARDS
IEC 60794-3
ACMA – AS/CA S008
AS 1049
IEC 60793-2-10: type A1a.3
ISO / IEC 11801 Category OM4
ITU G.651.1
IEC/EN 60793-2-50 Category B-652.D
ITU-T Recommendation G.652.D
EN 50 173-1: Category OS2 and OS1a
ISO / IEC 11801: Category OS2 and OS1a
TECHNICAL
2 to 72 fibers
   Number of elements: 6
   Tube/Filler diameter: 2.1mm
   Cable nominal diameter: 12.0mm
   Cable nominal weight: 105kg/km
   Max. installation tension: 2.0kN
84 to 96 fibers
   Number of elements: 8
   Tube/Filler diameter: 2.1mm
   Cable nominal diameter: 12.7mm
   Cable nominal weight: 128kg/km
   Max. installation tension: 2.5kN
108 to 120 fibers
   Number of elements: 10
   Tube/Filler diameter: 2.1mm
   Cable nominal diameter: 14.2mm
   Cable nominal weight: 165kg/km
   Max. installation tension: 2.5kN
132 to 144 fibers
   Number of elements: 12
   Tube/Filler diameter: 2.1mm
   Cable nominal diameter: 15.6mm
   Cable nominal weight: 196kg/km
   Max. installation tension: 3.0kN
Max. crush resistance
   Short term: 2.0kN/100mm
   Long term: 1.0kN/100mm
Min. bending radius
   At full load: 20mm x Cable OD
   At no load: 10mm x Cable OD
Temperature range
   Installation: -0°C to +50°C
   Transport & Storage: -20°C to +70°C
   Operation: -10°C to +70 °C
PHYSICAL
Fiber and Buffer Tube Colors:
1 – Blue, 2 – Orange, 3 – Green, 4 – Brown,
5 – Gray, 6 – White, 7 – Red, 8 – Black,
9 – Yellow, 10 – Violet, 11 – Pink, 12 – Aqua
Existing customers can access our Customer Support Portal or see here for Product Documentation and Installation Instructions.
We operate through a global network of independent distributors to ensure you can access the right products at the right time.
Our local sales and technical support teams are on hand to provide the product and technical expertise you need.
