This product is obsolete. Please contact us for more information.
Part No: PID-00030
Region: emea
The fully shielded sliding patch panel outlet utilizes a two part sliding construction which allows access for installation, termination and maintenance. Cable support is provided in three positions for added strength and full 360 degree shielding is achieved with a braided foam strip on each half of the panel. A single label holder simplifies the identification of the channels.
The panel has been designed with a number of features to assist in installation. Shielding is achieved by baring a small section of the cable braid and pressing it firmly on the rfi strip by the use of two cable ties. The panel can be partially withdrawn for termination, giving better support for the punch down operation. Cable may be terminated to either the 568A or B schedule.
Mechanical
Jack Connector
Operating Life : Minimum 500 insertion cycles
Contact Material : Phosphor Bronze
Contact Plating : 1.27 micrometres Au/Ni
Material : UL94VO Polyester
IDC Connector
Operating Life : Minimum 100 reterminations
Contact Material : Phosphor Bronze
Contact Plating : Sn/Pb over Ni
Termination Tools : Molex and industry standard termination tools
IDC Terminations: Suitable for 0.4mm-0.6mm solid or stranded cable, maximum outside diameter 1.5mm
Electrical
D.C. Resistance : < 20 milliohms
Insulation Resistance : > 500 megohms
Attenuation(dB)
@ 1 MHz 0.1
@ 16 MHz 0.2
@ 100 MHz 0.4
Crosstalk (dB)
@ 1 MHz 65
@ 16 MHz 56
@ 100 MHz 46
PowerSum Worst Pair
@ 100 MHz 43
Return Loss(dB)
@ 1 MHz 62
@ 16 MHz 54
@ 100 MHz 21.2