The PowerCat 6 Shielded Tool-less Keystone Jack is in addition to the PowerCat 6 STP product line designed for installation in Structured Cabling Systems requiring Keystone size apertures for wall outlet installations. The jack is terminated without the use of a Punch Down Tool.
The jack is designed for use in a two-connector permanent link or channel configuration so the standard Molex C6 Shielded DataGate panels are installed in the Distribution closet and C6 Keystone Jacks are installed in the Telecommunication/Wall Outlets. The jack does not feature a dust shutter. This product provides excellent protection against electromagnetic interference protection due to its fully shielded 360° construction.
Commercial Standards
TIA/EIA-568-C.2:2009, EN 50173- 1:2011, Class E, ISO/IEC 11801:2010 (Ed 2.2) Class E, FCC Subpart F68.5
Technical Information
Mechanical Characteristics
Width [mm]: 17
Height [mm]: 19.3
Depth [mm]: 42.4
Weight [g]: 40
Material: Zinc Alloy plated Bright Ni/Cu
Connector
Housing: Zinc Alloy plated Bright Ni/Cu
Operating Life:
Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 1.25 micrometers Au/Ni
Contact Force: 100g minimum
Plug Retention Force: 6.8kg minimum
IDC Connector
Housing: Polycarbonate, UL94V-0 rated
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin Matte Finish
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid
Electrical/Optical Characteristics
Interface Resistance: 20mΩ
Initial Contact Resistance: 2.5mΩ
Insulation Resistance: >100MΩ
PoE
Our PowerCat 6 system is suitable for PoE applications as defined below:
IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
Notes:
For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout. To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
Molex recommends that the full range of PowerCat 6 products be used in a system to maximize cabling and PoE performance. Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/ourwarranty/
Existing customers can access our Customer Support Portal or see here for Product Documentation and Installation Instructions.
We operate through a global network of independent distributors to ensure you can access the right products at the right time.
Our local sales and technical support teams are on hand to provide the product and technical expertise you need.
