x
Part No: CAA-00419-0H
Region: emea
***PLEASE NOTE THIS PRODUCT IS ONLY AVAILABLE IN EUROPE***
Molex PowerCat C6 U/UTP outdoor, underground cable sheath is manufactured from a HDPE compound that insulates the cores whilst a PE (UV) sheath provides protection against moisture.
An additional nylon outer jacket provides protection against abrasion and termites. The rugged construction of this cable makes it idea for outdoor/underground installations.
MECHANICAL
Conductor Size: Solid 0.58 23 AWG Bare Annealed Copper
Primary Insulation: HDPE
Nominal O.D.: 1.0mm
Sheath Type: Inner: PE (UV), Outer: Nylon
Nominal O.D,: Overall: 6.1mm, Inner: 0.5mm, Outer: 0.4mm
Operating Temperature: -20°C to +75°C
NVP: 65%
ELECTRICAL
Refer to datasheet for more information
COMMERCIAL STANDARDS
Cat 6 ANSI/TIA/EIA-568-B.2-1
ISO/IEC 11801
UL444
FIRE PROPAGATION TESTS
EU Regulation 305/2011 (CPR)
EN 50575:2014+A:2016
EuroClass: Fca
DoP No: MLXCES-2018-C035
PoE
Our PowerCat 6 system is suitable for PoE applications as defined below:
IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
Notes:
For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout. To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
Molex recommends that the full range of PowerCat 6 products be used in a system to maximize cabling and PoE performance. Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/ourwarranty/
