Part No: CAA-00443-VL
PowerCat 6 U/UTP LS0H Cable Dca-s1,d0,a1 easy-pull box is exclusive to the UK/NE market. Molex PowerCat 6, 4 Pair U/UTP cable has been designed to support high speed data transmission systems such as Gigabit Ethernet. The cable is part of the PowerCat 6 range of products that are designed to comply with the Category 6 specification.
Available only in the UK/NE.
Conductor Size: 0.515 +/-0.005mm
Primary Insulation: Polyethylene
Sheath Type: LS0H
External O.D: 5.8 +/-0.3mm
Sheath Color: Violet RAL4005
Average NVP%: 65% (nom.)
Minimum bend radius: 8 x o.d.
Maximum Pulling force: 100N
Operating Temperature: -20° to 60°C
Installation Temperature: 0° to + 50°C
1.0-250.0MHz Impedance (Ω): 100±15
1.0-250.0MHz Delay Skew (ns/100m): 45
DC Resistance (Ω/100m) max.: 9.38
DC Conductor Resistance Unbalance (%): Maximum 5.0
Shipping weight: 39kg/km
IEC 60332-1, IEC 61034-2
IEC 60754-1 & 2
FIRE PROPAGATION TESTS
EU Regulation 305/2011 (CPR)
Our PowerCat 6 system is suitable for PoE applications as defined below:
IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout. To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
Molex recommends that the full range of PowerCat 6 products be used in a system to maximize cabling and PoE performance. Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/ourwarranty/
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.