Change Language: English

PowerCat 6A F/UTP Cable Plenum/Non Plenum


Part No: CAA-0320P-XX , CAA-0320R-XX

Region: americas usa

The PowerCat 6A Shielded Cable is a key component of the PowerCat 6A end-to-end solution.

Molex PowerCat 6A F/UTP Cable is specifically designed to support high speed data network applications such as 10-Gigabit Ethernet (10GBASE-T). The cable is constructed of four insulated copper twisted pairs that are wrapped around aluminum foil and polyester jacket. This cable minimizes alien crosstalk, provides excellent signal isolation and provides superior electromagnetic interference (EMI) protection.

Molex recommends that the full range of PowerCat 6A Shielded products be used in a system to maximize cabling performance.

This system is fully compliant with channel requirements specified by the TIA/EIA 568-C.2, Cat 6A and ISO/IEC 11801 2nd Ed. Am. 1, Class EA for 10GBASE-T applications.

Features & Benefits Technical Info Related Products
  • Outstanding signal isolation
  • ETL verified to TIA/EIA-568-C.2 Cat 6A
  • 1000 foot to 0 foot markers
  • Resistant to alien crosstalk

0.57mm (23 AWG), bare copper wire insulated with FEP (Plenum) or PE (polyethylene). Two insulated conductors twisted together with varying lays to form a pair and four pairs laid up to form the basic unit. The cable is shielded with an overall polyester/aluminum foil with stranded tinned copper drain wire and jacketed in flame-retardant PVC.

Color Code
   Pair 1: White/Blue Blue
   Pair 2: White/Orange Orange
   Pair 3: White/Green Green
   Pair 4: White/Brown Brown

Temperature Rating
   Installation: 0˚C to +50˚C
   Operation: -20˚C to +60˚C
Conductor diameter - in. (mm): 0.023 (0.58)
Insulated Conductor diameter - in. (mm): 0.046 (1.04)
Cable diameter - in. (mm): 0.280 (7.11)
Nominal cable weight - lb./kft. (kg/km): 40 (18.14)
Max installation tension - lb. (N): 25 (110)
Min. bend radius - in. (mm): 1.12 (28.45)
Pulling tension: 110 N (25 lbf)

Mutual Capacitance: 5.6 nF/100 m max
DC resistance maximum: 9.38 Ohms/100m maximum
Skew: 45 ns/100m maximum
Pair to ground Unbalance: 330 pF/100m max
Nominal Velocity of Propagation (NVP): See cable jacket for NVP setting
Coupling Attenuation: 75dB @ 30 MHz

North American: TIA/EIA-568-C.2 Cat 6A and UL444 & C22.2 No.214-02
International: EU Directive 2002/95/EC (RoHS), IEC 61156-5 ED2.0_46C844CDV

Plenum:-NFPA 262
Non-Plenum: UL1666
ETL Listed

Category 6A F/UTP Cable is intended for high speed data applications up to 500MHz including:
   IEEE 802.3an 10GBASE-T 10Gb/s
   IEEE 802.3 1000GBASE-T 1Gb/s
   ATM 155Mb/s 155Mb/s
   IEEE 802.3 100BASE-TX 100Mb/s
   CDDI 100Mb/s

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.