Part No: PCD-70503, PCD-70505, PCD-70507, PCD-70510, PCD-70515, PCD-70520
Molex slim shielded PVC patch cords support Category 6A systems utilizing 28 AWG low diameter cable to reduce patch cord congestion in high density installations.
Molex PowerCat 6A Slim Patch Cords are designed to support high-speed 10GBASE-T networks and offer a 20% space saving compared with standard Molex 26 AWG C6A Patch Cords.
The Slim version allow for easier management and improved airflow between patched ports in high-density patching installations. The lower diameter cord makes visibility of individual plugs and ports clearer and provide improved access for patching.
Manufactured from high quality, flexible four pair 28 AWG stranded copper wire. Each pair is shielded in aluminum/mylar foil and enclosed in a PVC sheath. The patch cords include Molex high performance Category 6A shielded RJ45 plugs with anti-snag latch protection and low-profile, strain-relief boots.
Conductor Size: 28AWG stranded bare copper wire
Screen Material: Aluminum/Mylar
Drain Wire: Tinned copper wire
Sheath: CM PVC
Bend Radius: >8 x Outer diameter
Outer Diameter: 0.20”
Rated Voltage: 30V
Tensile Strength before aging: >13.8MPa
Insertion Loss de-rating factor: 1.95 (as per ANSI/TIA-568.2-D:2018)
Durability: >750 mating cycles
Housing Material: Polycarbonate UL94V-0 or 94V-2 (plug & boot)
Contact Material: Phosphor Bronze
Contact Plating: 50 micro inches gold
RJ45 plug dimensions compliant with IEC 60603-7
Cable to plug tensile strength: 89N min.
Patch Cord Assembly
Operating Temperature: -25°C to 55°C
Contact Resistance: <20MΩ
Insulation Resistance: <500MΩ, 1000V DC/min
Dielectric Withstand Voltage: 1000 VDC/min, <0.5A
Current: 250V AC max @ 2A
UL 1863 (Pending)
CAN/CSA C22.2 No.233-17 (Pending)
IEEE 802.3af, 802.3at, 802.3bt