The new Molex MPO solution supports high bandwidth and high-density applications such as data centers and storage area networks. MPO products are factory terminated and modular in design to enable fast, economical installation and flexible system configuration. Products in the range include: MPO trunk pre-terminated cable assembly, MPO-X hybrid assembly, MPO fiber optic cables and MPO fiber optic cassettes.
Highlights:
- Cost-effective alternative to MTP
- Similar optical performance to MTP
- Uses same cable and metal plate as existing MTP range, only difference is the MPO connector
MPO Cable – Round, flexible outer jacket is easy to bend, route and install
– Available in Plenum, Riser and LS0H constructions
– Industry-leading low insertion loss
– Available in 8, 12 and 24 fiber constructions
– 100% tested
– Pulling eyes installed to protect the assembly during installation
– Part number generator available on Molex CSPCable assembly – Round, flexible outer jacket is easy to bend, route and install
– Available in different sheath types
– Industry-leading low insertion loss
– Available in 8 to 144 fiber constructions
– 100% tested
– Pulling eyes installed to protect the assembly during installation
– Part number generator available on Molex CSPMulticore assemblies – Available in Low Loss or standard Loss
– Available in 12 and 24 cores standard (Up to 144 fibers available)
– 2mm ruggedized tails and 900μm tails available
– Customized Tail Length and Configuration options available
– LS0H and plenum cable jacket options
– RoHS Compliant
– Part number generator available on Molex CSPCassettes – Self-contained fiber optic patching enclosures convert the MPO interface to a standard LC, SC, MT-RJ or ST coupler
– Industry-leading low insertion loss
– Available in 12 and 24 fiber versions
– Can be inserted into any standard or spec grade Molex rack mount or wall mount enclosure
– Front port identification plus labeling field on cassette top for fiber documentation
Regional availability:
Global
