Part No: 180788-3000
The CoreSync Field Tester Kit allows for a quick validation of daisy-chain branches after the CoreSync System has been installed.
By connecting to the first device of a CoreSync daisy-chain, the Field Tester Kit will allow each device to blink sequentially depending on its location in the daisy-chain. The Field Tester Kit powers all devices on the daisy-chain using an AC connection. The first device will blink once, second device will blink twice, etc. until all devices have seen their turn. Once the cycle has been completed, the cycle will begin again at the first CoreSync daisy-chain device.
Input Voltage: 110-250VAC 50-60Hz
Max Input Current: 15A
Output Power: CoreSync Bus (42V-60V DC)
FCC Class B
Output over-current protection
Output over-voltage protection
Internal Over-Temperature Protection
DO NOT hot swap
Housing Material: Polypropylene Copolymer
Weight: 1.78kg (3.88lbs.)
Ambient Temp Range: 0 to 55°C (32 to 131°F)
Storage Temperature: -40 to 60°C (-40°F to 140°F)
Max Case Temperature : 60°C
Relative Humidity: 10-80% Non-Condensing
Environmental Rating: Indoor
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.