Part No: 180788-2000
The Fixture Manufacturer Kit is a portable solution for testing and validating CoreSync-Ready light fixtures having integrated Drivers and Sensors, automating the end of line testing process.
The Fixture Manufacturer Kit is a self-enclosed kit designed to validate a light fixture with CoreSync components integrated. The tester connects to both the input and output ports on any CoreSync-enabled light fixture. The Tester is an all-in-one solution, and the automated test can be used on fixtures with multiple Drivers, color tuning capabilities, and integrated CoreSync Sensors. Additionally, the Tester automatically steps through different brightness and color commands, allowing the operator to visually inspect the light output and confirm everything has been wired correctly inside the fixture.
Input Voltage: 110-250VAC 50-60Hz
Max Input Current: 15A
Output Power: CoreSync Bus (42V-60V DC)
FCC Class B
Output over-current protection
Output over-voltage protection
Internal Over-Temperature Protection
DO NOT hot swap
Housing Material: ABS plastic
Weight: 1.36kg (3.0lbs.)
Ambient Temp Range: 0 to 55°C (32 to 131°F)
Storage Temperature: -40 to 60°C (-40°F to 140°F)
Max Case Temperature : 60°C
Relative Humidity: 10-80% Non-Condensing
Environmental Rating: Indoor
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.