Part No: 180996-5108, 180996-5109, 180996-6108, 180996-6109
Region: americas northern-europe
The Molex CoreSync Programmable Smart High Current LED Driver is a compact DC/DC LED driver that can be programmed to specific power outputs, for driving LED engines in a wide variety of light fixtures, controlled and powered by a Molex CoreSync PoE Gateway.
The CoreSync Smart LED Drive can be embedded in a fixture or placed remotely. The Driver is connected to the CoreSync PoE Gateway using rugged and reliable Molex Micro-Fit connectors.
Drive mode: Constant current
Topology: DC/DC low voltage
Output power (max): 59W
Input voltage: 42 to 57VDC: IEEE802.3xx
Number of outputs: Single or dual
Output voltage: 12VDC to 42VDC
Output currents range: 1060mA to 1400mA
Operating Temperature: Tcase 0 To 75°C* (32°F to 32°F )
Storage Temperature: -40 To +85°C (32°F to 32°F )
Humidity: 5% To 95% Rh
Conforms to UL 2108
Certified to CSA22.2
Complies with FCC Part 15 Subpart B
Complies with CE directives
Output over-current protection
Output over-voltage protection
Int. thermal programmable protection
Weight: 98 g
Dimensions: 95.10mm x 42.00mm x 18.80mm (3.74 “ x “1.65“ x .74”)
ELECTRICAL SPECIFICATION AT 25° C
In-Rush Current: <10A, 52V DC, cold start, full load
Input Current: 1.5A@52V DC, full load
Efficiency: 95% (typical) at 52V DC input, full load
Constant Current Regulation: 3% over-voltage input variation
Constant Current Accuracy: ±3%
Ripple and Noise (max): 700mV, 20MHz B.V..
Input: CoreSync Bus, 4-pin Micro-Fit
Output: Poke-in connector - CH+/CH-
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.