Part No: 180997-0003, 180997-0103
Region: americas northern-europe
The LED Relay Zone Controller uses wireless technology to communicate with other wireless, self-powered components.
The compact size enables flexible installation inside of or next to electrical boxes and fixtures so the LED Relay Zone Controller can be easily wired out of sight using standard wiring practices. Simply link the module to a CoreSync motion sensor, light sensor, switch or rocker pad and experience levels of efficiency and convenience that can only be achieved through wireless controls.
Power Supply: 120/277VAC, 60Hz
General purpose: 16A @ 120/277VAC
Resistive: 16A @ 120/277VAC
Tungsten: 960W @ 120VAC
Ballast: 600W @ 120VAC
0-10V output: Current sinking 35mA / sourcing 4mA
For high sinking current and dim values below 10%, the output voltage may exceed the selected output value and reach 1V max.
Power consumption: 1.1W full load, 550mW quiescent
Surge protection: Exceeding IEC 61000-4-5 installation Class 4
Input/output: Flying lead-style wires; 2 power input;
1 switched output; 2 output for 0-10V control;
2 buttons, one LED for device configuration and manual control
RF communications: EnOcean 902MHz
Transmission range: 80 ft. (25m)
Dimensions: 2.78” H x 1.65” W x 1.1” D (73mm x 42mm x 28mm)
Weight: 3.2 oz. (90 g)
Mounting: Inside standard electrical box or connect to electrical box or fixture using threaded nipple
Environment: Indoor use only; 32° to 140°F (0° to 60°C); 20% to 85% relative humidity (non-condensing)
EnOcean equipment profile: D2-40-00
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.