Part No: AFOLS006OS1-BK-D, AFOLS012OS1-BK-D, AFOLS024OS1-BK-D, AFOLS048OS1-BK-D, AFOLS072OS1-BK-D, AFOLS096OS1-BK-D, AFOLS012OM4-BK-D, AFOLS024OM4-BK-D, AFOLS048OM4-BK-D
Region: apac
This loose tube dielectric optical cable is designed for external underground installations in (micro) ducts by pulling, blowing or floating techniques. Polyamide provides anti-termite protection.
Made up of a multi-loose tube construction – single layer 2 to 144 fibers, the tube is made of a thermoplastic material, containing up to 12 optical fibers filled with a low viscosity, thixotropic, non-melting gel fully compatible with fiber coating and tube material, a glass GRP strength member with or without over-sheathing, the required numbers of elements (tubes and fillers) are SZ stranded around the central strength member and there are water swellable elements (dry-core) providing longitudinal water tightness. The sheath is made up of polyethylene in compliance with AS 1049. The sheath has two ripcords provided beneath for easy removal. The hard jacket is a UV stabilized polyamide (Nylon) in compliance with AS 1049 integrally bonded to PE sheath. Outside the hard jacket is a UV stabilized polyethylene sacrificial sheath, in compliance with AS 1049.
Available only in Australia.
Number of elements: 6
Tube diameter: 1.55mm
Cable nominal diameter: 7.3mm
Cable nominal weight: 43kg/km
Max. installation tension: 1.0kN
Max. crush resistance: 2.0kN/100mm
Min. bending radius
   At full load: 150mm x Cable OD
   At no load: 75mm x Cable OD
Temperature range
   Installation: -0°C to +50°C
   Transport & Storage: -20°C to +70°C
   Operation: -10°C to +70 °C