The PowerCat 6 Angled MOD-SNAP III module is ideal for floor box applications. The product is a fully assembled unit featuring the shuttered DataGate connector in a 37.5 x 22mm fascia (BT6C size). The angled design reduces patch cord bend radius particularly in shallow floor box installations. The Angled MOD-SNAP III Module can also be used in the MOD-SNAP range of wall plates.
The MOD-SNAP III module features the DataGate Category 6 connector. This superior RJ45 IDC includes a unique integral shutter that not only protects the connector from dust and contaminants, but the ingenious spring-loaded design also ejects improperly seated patch cords. The DataGate connector is dual color coded for either 568A or 568B wiring schedules. The DataGate connector is also backwards compatible with C5e systems.
COMMERCIAL STANDARDS
ANSI/TIA-568.2-D-2018
FCC Subpart F 68.5
ISO 60603-7
ISO/IEC 11801-1:2017
TECHNICAL INFORMATION
Mechanical Characteristics
Jack Connector
Plastic Housing:
Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 1.27 micrometers Au/Ni
Contact Force: 100g minimum
Plug Retention Force: 6.8kg.
IDC Connector
Plastic Housing: Polycarbonate, UL94V-0 rated or equivalent
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin/Lead Plate
Contact Force: 100g minimum
Wire Accommodation: 22-24 AWG solid
ELECTRICAL/OPTICAL CHARACTERISTICS
Interface Resistance: 20mΩ
Initial Contact Resistance: 2.5mΩ
Insulation Resistance: >100 MΩ
Minimum Backbox Depth Requirement: 25mm
Termination Tool: 110
Shipping Weight: 312g (Pk of 20)
PoE
Our PowerCat 6A system is suitable for the most demanding PoE applications:
– IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
– HD Base-T PoH up to 100W
– RP3 compliant as defined by EN 50174-2:2018, ISO/IEC 14763-2:2019 and AS/NZS 14763.2:2020
Notes:
– For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout.
– To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
– Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
– Molex recommends that the full range of PowerCat 6A products be used in a system to maximize cabling and PoE performance.
Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/our-warranty/
Existing customers can access our Customer Support Portal or see here for Product Documentation and Installation Instructions.
We operate through a global network of independent distributors to ensure you can access the right products at the right time.
Our local sales and technical support teams are on hand to provide the product and technical expertise you need.
