Part No: KSJ-00018-XX
Region: global
The DataGate jack is designed to maintain clean secure connections. The RJ-45 jack features a patented ‘spring-loaded shutter’ which protects it from dust and contaminants as well as provides tactile feedback – the spring-loaded shutter pops out an improperly seated patch cord–all with single-handed plug-in and removal. DataGate jacks utilize patented IDC V-shaped contacts that flex not fatigue when terminated. The DataGate jack is engineered for use across a broad range of Molex products.
Termination Process: Videos
The videos below, created by the Molex Technical Services Team, show the process for terminating cable into a Molex PowerCat 6 DataGate Jack, p/n KSJ-00018, using a 110 Punchdown tool and a Multipair tool.
Watch on YouTube – 110 Punchdown tool
MECHANICAL
Jack Connector
Plastic Housing: Thermoplastic UL94V-0 rated or equivalent
Operating Life: Minimum 750 insertion cycles
Contact Material: Copper Alloy
Contact Plating: 50μ” Gold/100μ” Nickel
Contact Force: 100g minimum
Plug Retention Force: 11 lbf minimum
IDC Connector
Plastic Housing: Thermoplastic UL94V-0 rated or equivalent
Operating Life: Minimum 20 reterminations
Contact Material: Copper Alloy
IDC Contact Plating: Tin matte finish
Wire Accommodation: 22-24 AWG solid
ELECTRICAL
Interface Resistance: 20mΩ
Initial Contact Resistance: 2.5mΩ
Insulation Resistance: >100 Megohms
PHYSICAL
Dimensions: 23.9mm (H) x 17.8mm (W) x 32.3mm (D) (0.94”H x 0.70”W x 1.27”D)
Shipping Weight: 14g (0.49 oz)
COMMERCIAL STANDARDS
TIA/EIA-568-C.2:2009 cat.6,
EN 50173-1:2011 Class E,
ISO/IEC 11801:2010 (Ed 2.2) Class E, FCC Subpart F68.5
UL listed
AS/CA S008:2020 25kg
PoE
Our PowerCat 6 system is suitable for PoE applications as defined below:
IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
Notes:
For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout. To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
Molex recommends that the full range of PowerCat 6 products be used in a system to maximize cabling and PoE performance. Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/ourwarranty/
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.