The PowerCat 6 MOD-SNAP module is the walloutlet component of the PowerCat 6 System. Designed to comply with the Category 6 specification, the PowerCat 6 System performance is enhanced by the patented plug and socket combination of the RJLP socket and Molex plug, allowing Category 6 level performance and backwards compatibility with the Molex Premise Networks PowerCat C5E System. Molex Premise Networks recommends that the full range of PowerCat 6 products is used in a system to provide the performance indicated in the Category 6 standard.
Electrical Characteristics
D.C. Resistance: <20mΩ
D.C. Resistance Imbalance: <2.0mΩ
Insulation Resistance: >100MΩ
Mechanical Characteristics
Termination Tools: Molex Premise Networks and other industry standard installation tools
IDC Terminations
Suitable for 0.4mm – 0.6mm solid or stranded cable, maximum o.d 1.5mm.
Patents pending on connector and module designs.
Jack Connector
Operating Life: Minimum 500 insertion cycles
Contact Material: Phosphor Bronze
Contact Plating: 1.25 micrometres Au/Ni
Material: UL 94VO Thermoplastic
IDC Connector
Operating Life: Minimum 100 Reterminations
Contact Material: Phosphor Bronze
Contact Plating: Sn/Pb over Ni
Wire Accommodation: 2 x 22-26 AWG solid or stranded
Backbox/Trunking depth requirement
Minimum clearance: 16mm
Shipping weight: Box 20 = 0.35kg
Existing customers can access our Customer Support Portal or see here for Product Documentation and Installation Instructions.
We operate through a global network of independent distributors to ensure you can access the right products at the right time.
Our local sales and technical support teams are on hand to provide the product and technical expertise you need.
