Part No: CAA-00305, CAA-00325
Region: emea
Molex PowerCat 6 4 Pair U/UTP LS0H Cable has been designed to support high speed data transmission systems such as Gigabit Ethernet. The cable is part of the PowerCat 6 range of products that are designed to comply with the Category 6 specification. We recommend that the full range of PowerCat 6 products are used in a system to maximize cabling performance, providing extended frequency response and enhanced bandwidth.
Mechanical Characteristics
Conductor Size: 23 AWG
Primary Insulation: HDPE
Sheath Type: LS0H
External O.D: 6.2mm +/-0.4mm
Sheath Color: Violet RAL4005
Average NVP% 69%
Maximum Pulling force 100N
Shipping weight: 305m box: 14.9kg
Fire Propagation Tests
EU Regulation 305/2011 (CPR)
EN 50575:2014+A:2016
Euroclass: Dca-s2,d2,a1
DoP No: MLXCES-2018-C-031 located on web http://www.molexces.co.uk/about-us/our-compliance/cpr/dop-certificates/
Commercial Standards
ISO/IEC 11801
EIA/TIA -568-C.2
EN 50173-1:2011
IEC 61156-5
IEC 60332-1-2 (332.1)
EN50288-5
PoE
Our PowerCat 6 system is suitable for PoE applications as defined below:
IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
Notes:
For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout. To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
Molex recommends that the full range of PowerCat 6 products be used in a system to maximize cabling and PoE performance. Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/ourwarranty/
Electrical/Optical Characteristics
1.0-250.0MHz Impedance (Ω): 100±15
1.0-250.0MHz Delay Skew (ns/100m): ≤45
DC Resistance (Ω/100m) max.: 9.38
DC Conductor Resistance Unbalance (%): Maximum 5.0
For more information, refer to the datasheet for the Technical Performance (100m) table
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.