Change Language: English

CoreSync Wireless Occupancy Sensor, Wall Mount


Part No: 180997-0005, 180997-0105

Region: americas northern-europe

CoreSync Wall Mounted Occupancy Sensors are wireless and self-powered, providing a cost-effective way to control energy use in unoccupied rooms.

The CoreSync Wall Mounted Occupancy Sensor harvests solar energy from indoor light and uses radio frequency technology to communicate wirelessly with other EnOcean-enabled devices, helping building automation systems to reset temperature, turn off lights and control other electrical loads upon detecting that a space has been unoccupied for a set period of time.

Features & Benefits Technical Info Related Products
  • Wireless, interoperable - Communicates with other CoreSync devices and with CoreSync Network Connected Lighting system
  • Self-powered - Needs no wiring or battery support in a light-harvesting environment
  • PIR motion sensor with 360° viewing angle - Maximum efficiency in different room settings
  • Two molded buttons with LED indicators - Ability to link and configure the device locally
  • Internal tray - Provides power from supplemental coin battery in low-light settings

Power Supply: Indoor light energy harvesting; Supplemental battery (CR2032) or 2-wire connector for external power or remote solar cell (Optional)
RF Communications: 902MHz, 868MHz
Transmission Range: 80 ft. (25m)
Motion Detector Range: 34 ft. (10m) diameter
Sustaining Charge Time: 3 hours per 24 hours @ 200 lux
Charge Time to Full: 25 hours @ 200 lux
Unoccupied Transmission: 10 and 30 minutes since last motion detection
Operating Life in Darkness: 80 hours (after full charge)
EnOcean Equipment Profile (EEP): A5-07-01
Minimum Operating Light: 50 lux (for auto-off only)
Agency Compliance:
  902MHz: Contains FCC: SZV-STM300U IC:
  5713A-STM300U 868MHz: CE Certified,
  R&TTE Compliant
Dimensions: 5.83” H x 2.52” W x 1.8” D (148mm x 64mm x 45mm)
Mounting Height: 6 to 8 ft. (1.8 to 2.5m) recommended

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.