x
Part No: KPD-00079
Region: emea
The 96 Pair Block is a key component in Molex’s Category 6 wall mount Premise Distribution System (PDS). Supplied with the 110 style connector, Category 6 performance is guaranteed by the unique pair separation within the connector. Solidly constructed the base features cut-outs for easier installation and cable routing, whilst enabling cable sheathing to be maintained down to 25mm from the IDC.
Available only in Sub-Saharan Africa for a limited.
Mechanical Characteristics
96 Pair Block
Material: Flame Retardant Thermoplastic
Colour: Black
Dimensions: 89mm x 273mm x 89mm
Shipping Weight: 330g
IDC Connector
Plastic Housing: UL94V-0Rated, Thermoplastic
Contact Material: Phosphor Bronze
IDC Contact Plating: Solder Plate (60% tin / 40% Lead)
Wire Ranges: 22-26AWG (0.4mm – 0.63mm)
Limiting OD: 1.4mm
Re-terminations: 200
Conductor Types: Plastic Insulation. Including PVC, IPVC, Polyethylene, PTFE, Polyurethane, Polyolefin & Nylon
Temperature Range
Storage: -40 to +70°C
Operational: -10 to +60°C
Humidity: 93%
Electrical/ Optical Characteristics
Dielectric Strength: 1.0kV RMS @ 60Hz
Resistance Isolation: 10 mohms
Contact Resistance: 20 milliohms MAX.
Current Rating: 1.5 amps at 20ºC
By continuing to use the site, you agree to the use of cookies. more information
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.
