Medical Grade Antimicrobial Wallplates & Patch Cords

• Assists in prevention of discolorization and odor
• Contemporary design, smooth finished wall plates for ease of cleaning
• Modular wallplate footprint allows for Cat 6, Cat 6A and optical fiber fitout
• 10G performance when installed as a complete PowerCat 6A Shielded System
• LS0H Sheath – Patch Cords
• Slim anti-snag slip on boots – Patch Cords
• RoHS Compliant
• Third party tested to ISO 22196:2011 for 99% efficiency against K.Pnemoniae, E.Coli and Staphylococcus Aureus

MECHANICAL
Patch Cords
Cable Conductor size: 26 AWG stranded copper wire
Screen material: Aluminum/polyester shield with tinned copper drain wire
Nom. O.D.: 6.5mm
Sheath: Low Smoke Zero Halogen (LS0H)
Bend radius: 8X O.D.
Operating temperature range: -25°C to +55°C

Plug
Min. operating life: 750 insertion cycles
RJ45 plug material: Clear Polycarbonate (PC)
Boot material: Poly Carbonate (PC)
Contact material: 0.35mm thick copper
Contact plating: 1.27um gold
RJ45 plug dimensions compliant with: ISO/IEC 60603-7-51 and FCC 47 Part 68

PHYSICAL
Wallplates
Dimensions
   Single Gang: 86 x 86mm (external), 52 x 45mm (internal aperture)
   Module and Blank: 52 x 22.5mm
   Double Gang: 86 x 145mm (external), 52 x 90mm (internal aperture)
   Module and Blank: 52 x 22.5mm

COMMERCIAL STANDARDS
Patch Cords
ISO/IEC 11801 2nd Ed Amd 1 Class EA
TIA-568-C.2 Cat 6A
CSA C22.2
ISO 22196:2011, 99% efficiency against Staphylococcus A
LS0H Sheath: IEC 60332-1
IEC 61034-2
RoHS Compliant

Wallplates
ISO 22196:2011, 99% efficiency against K.Pnemoniae, E.Coli and Staphylococcus A
RoHS Compliant

PoE
Our PowerCat 6A system is suitable for the most demanding PoE applications:
- IEEE 802.3bt from Type 1 to Type 4, and CISCO UPoE+
- HD Base-T PoH up to 100W
- RP3 compliant as defined by EN 50174-2:2018, ISO/IEC 14763-2:2019 and AS/NZS 14763.2:2020

Notes:
- For new installations of PoE Type 3 / Class 5 and above that wish to be eligible for the Molex 25 year Application Assurance Warranty, we require Category 6A cable to be used throughout.
- To confirm your PoE / RP3 cabling design is eligible for the Molex 25 year Application Assurance Warranty, your design must be verified and validated with the Molex PoE Calculator. Read more at https://www.molexces.com/poe-calculator
- Molex recommends that the PoE feature on an individual switch port is power disabled prior to unplugging the associated powered Device.
- Molex recommends that the full range of PowerCat 6A products be used in a system to maximize cabling and PoE performance.
Details on Molex requirements for Warranty can be found at: https://www.molexces.com/about-us/our-warranty/