Xpress G2 Pre-Polished Pre-Assembled Connectors

• Quick – Assembly is achieved in under 2 minutes
• Easy to Use – No need for polishing or adhesive
• Minimal operating skills required - Ideal for onsite installations.
• No Curing required – A mechanical grip effectively holds fiber in place. An index matching gel reduces the Fresnel reflection at the surface of the optical fiber
• Low Tooling Investment – only strip and cleaving tool required
• Reliable Performance – same environmental endurance as conventional connectors
• Multiple Formats available available in SC and LC form factors
• Available in Singlemode, Multimode, Angled Polish in 900μm and 250μm format,
• The Xpress G2 pack includes:
  - 10 pcs. Connectors
  - 10 pcs. Boots

MECHANICAL
Mating Durability: IL <0.1dB Change over 500 Cycles (Typical)
Insertion Loss (TYPICAL)
Singlemode PC: 0.2dB APC: 0.3dB
Multimode: 0.1dB
Return Loss (TYPICAL)
Singlemode PC: >55dB Typical, APC >66dB Multimode: >35dB
Ferrule: Zirconia Ceramic
Housing and Boot: UL 94V-0 rated Polymer
Alignment Sleeves: Zirconia Ceramic

Operating Temperature: -40ºC to +75ºC
Coupling Strength: Tensile Load: 33N 5 Sec
Cable Retention: 2.2N 5 Sec 0/90 Deg
Pull Test 3Nm/1min: 0.01dB 250μm, 0.005dB 900μm Tight Buffered Fiber

COMMERCIAL STANDARDS
IEC61654-4
TIA/EIA 568-C.3