Part No: ZAFO-000092, ZAFO-000093, ZAFO-000094, ZAFO-000095, ZAFO-000096, ZAFO-000097, ZAFO-000098, ZAFO-000099, ZAFO-000100, ZAFO-000101, ZAFO-000102, ZAFO-000103, ZAFO-000104
Region: apac
THIS PRODUCT IS ONLY AVAILABLE IN AUSTRALIA
This loose tube dielectric optical cable is designed for external underground installations in ducts or by direct burial. Glass fiber reinforced plastic material (GRP) armor provides rodent protection and polyamide provides anti-termite protection.
Multi-loose tube construction – 2 to 288 fibers
Made up of a multi-loose tube construction – 2 to 288 fibers, the tube is made of a thermoplastic material, containing up to 12 optical fibers filled with a low viscosity, thixotropic, non-melting gel fully compatible with fiber coating and tube material, a glass GRP strength member, the required numbers of elements (tubes and fillers) are SZ stranded around the central strength member and there are water swellable elements (dry-core) providing longitudinal water tightness. The bedding and sheath is made up of polyethylene in compliance with AS 1049. The sheath has two ripcords provided beneath for easy removal. The armored layer is made of flat GRP rods. The outer jacket is a UV stabilized polyamide (Nylon) in compliance with AS 1049 integrally bonded to PE inner sheath.
COMMERCIAL STANDARDS
IEC 60793-2-10: Type A1a.3
ISO/IEC 11801 Category OM4
ITU G.651.1
IEC 60794-3
IEC 60793-2-50 Category B.1.3
AS/CA S008: 2020
AS/NZS 2857
AS/NZS 3080
AS 1049
TECHNICAL
2 to 72 fibers
Number of elements: 6
Tube/Filler diameter: 2.1mm
Cable nominal diameter: 13.8mm
Cable nominal weight: 165kg/km
Max. installation tension: 4.0kN
84 to 96 fibers
Number of elements: 8
Tube/Filler diameter: 2.1mm
Cable nominal diameter: 15.5mm
Cable nominal weight: 210kg/km
Max. installation tension: 4.0kN
108 to 120 fibers
Number of elements: 10
Tube/Filler diameter: 2.1mm
Cable nominal diameter: 17.4mm
Cable nominal weight: 265kg/km
Max. installation tension: 5.0kN
132 to 288 fibers
Number of elements: 12
Tube/Filler diameter: 2.1mm
Cable nominal diameter: 18.4mm
Cable nominal weight: 300kg/km
Max. installation tension: 6.0kN
Max. crush resistance
   Short term: 4.0kN/100mm
   Long term: 2.0kN/100mm
Min. bending radius
   At full load: 30mm x Cable OD
   At no load: 15mm x Cable OD
Temperature range
   Installation: -0°C to +50°C
   Transport & Storage: -20°C to +70°C
   Operation: -20°C to +70 °C