x
earth

CUSTOMIZE YOUR EXPERIENCE

Close
Change Language: English Region: Americas

CoreSync Gateway 60W

'

Part No: 180993-0001

Region: global

The CoreSync Gateway 60W is a low voltage power distribution and network connected module compliant with the IEEE 802.3at standard and Cisco’s UPOE standard that utilizes 60W-per-port PoE technology.
This Gateway 60W receives a minimum guaranteed 51 watts of usable power from a PoE Network Switch, ensuring control and secure two-way communication with lights, sensors, and other CoreSync Daisy-Chained devices in a CoreSync-enabled building infrastructure.

COMMERCIAL STANDARDS

PoE, PoE+, UPOE

Class 2 Electrical Device

UL 2108 Listed

UKCA

BIS

CSA22.2 No. 250

FCC Part 15 Subpart B

Plenum Rated (Metal Enclosure)

Features & Benefits Technical Info Installation Instructions Related Products
  • IEEE 802.3at and Cisco UPOE Compliant Device - Uses low voltage PoE infrastructure for power and communication with lights, sensors, and other devices
  • Input power up to 60W - Capable of powering a single or multiple CoreSync devices
  • CoAP Network Communication - Easy and secure convergence of IP infrastructure
  • CoreSync Enabled - Daisy-Chain capable with easy connection to all CoreSync devices
  • UL 2108 listed - Safe operation and industry standard compliance

MECHANICAL
Housing Material: Extruded Aluminum (Metal Enclosure)
Length: 117.7 mm (4.63 in)
Width: 53.33 mm (2.10 in)
Height: 25.51 mm (1.00 in)
Weight: 119 g (4.19 oz)

Housing Material: LEXAN 243R-111 (Plastic Enclosure)
Length: 97.4 mm (3.83 in)
Width: 53.33 mm (2.10 in)
Height: 24.2 mm (0.95 in)
Weight: 79 g (2.79oz)

ELECTRICAL
Maximum Power Input: 60W at 42-57VDC
Maximum Power Output: 57.5W at 42-57VDC
Nominal Power Input: 51W at 42-57VDC (as per UPOE Standard)
Standby Power Consumption: 1.5W at No Load
Power Consumption at 51W: 2.0W (6.82 BTU/hr)
Power Consumption at 60W: 2.5W (8.53 BTU/hr)

ENVIRONMENTAL
Ambient Temp Range: 0 to 40°C (32 to 104°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Max. case temperature: 90°C for Metal Enclosure; 75°C for Plastic Enclosure
Relative Humidity: 10-80% Non-Condensing
Environmental Rating: Indoor

PRODUCT SAFETY
Internal Over-Temperature Protection
DO NOT hot swap

COMMERCIAL STANDARDS
PoE, PoE+, UPOE
Class 2 Electrical Device
UL 2108 Listed
CSA22.2 No. 250
FCC Part 15 Subpart B
Plenum Rated (Metal Enclosure)

CONNECTION INTERFACES
PoE Input: RJ45, CAT 5e (PoE rated) cable or better (visit https://www.molexces.com)
CoreSync Output: 10-Pin Micro-Fit 3.0 Connector, CoreSync Harness (visit https://molexces.com)