x
earth

CUSTOMIZE YOUR EXPERIENCE

Close
Change Language: English Region: Americas

CoreSync Gateway 60W, Constant Voltage

'

Part No: 180993-2012

Region: americas emea

The CoreSync 60W, Constant Voltage Gateway is a low-voltage power distribution and network connected module compliant with the IEEE 802.3at standard and Cisco’s UPOE standard that utilizes Power over Ethernet technology.
This CoreSync Gateway receives a minimum guaranteed 51 watts of usable power from a PoE Network Switch. Of the total 51W, up to 43.2W can power and control constant voltage LED fixtures, with the difference offering secure two-way communication with other CoreSync Daisy-Chained devices.

Features & Benefits Technical Info Related Products
  • Cisco UPOE compliant device- Uses low voltage PoE infrastructure for power and communication with lights, sensors, and other devices
  • Input power up to 60W- Capable of powering a single or multiple CoreSync devices
  • 24V Constant Voltage Output- Power and dimming control of constant voltage fixtures up to 43.2W
  • CoAP network communication- Easy and secure convergence of IP infrastructure
  • CoreSync Enabled- Daisy-Chain capable with easy connection to all CoreSync devices
  • UL 1310 listed- Safe operation and industry standard compliance

MECHANICAL
Housing Material: Extruded aluminum
Length: 117.7 mm (4.63 in)
Width: 53.33 mm (2.10 in)
Height: 25.51 mm (1.00 in)
Weight: 115 g (4.05 oz)

ELECTRICAL
Maximum Power Input: 60W at 42-57VDC
Maximum Power Output: 54.3W
Nominal Power Input: 51W (as per UPOE Standard)
Maximum LED Power Output: 43.2W at 24V
Standby Power Consumption: 2.0W at No Load
Power Consumption at 51W Input: 5.3W (18.08 BTU/hr)
Efficiency at full load: 90% (typical) at 52VDC input

ENVIRONMENTAL
Ambient Temp Range: 0 to 40°C (32 to 104°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Max. case temperature: 90°C
Relative Humidity: 10-80% Non-Condensing
Environmental Rating: Indoor

DIMMING PERFORMANCE
Dimming: PWM
Dimming Type: Linear
Dimming Frequency: 25KHz
Dimming Range: 1-100%

COMMERCIAL STANDARDS
PoE, PoE+, UPOE
Class 2 Electrical Device
UL 1310 Listed
CSA22.2 No. 250
FCC Part 15 Subpart B
Plenum Rated

PRODUCT SAFETY
Output Over-Current Protection
Internal Over-Temperature Protection
DO NOT hot swap

CONNECTION INTERFACES
PoE Input- RJ45, CAT 5e (PoE rated) cable or better (visit https://www.molexces.com)
CoreSync Output- 4-Pin Micro-Fit 3.0 Connector, CoreSync Harness (visit https://molexces.com)
LED Output- Poke-in Connector, solid core or stranded-tinned, 20-22AWG, 6mm strip length
• CH1 – LED Fixture

By continuing to use the site, you agree to the use of cookies. more information

The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.

Close